Version:

Possibility to transfer the measured values in combination with GARANT XCONNECT No.
359455 1.
Suitable only for Siemens and Heidenhain controllers.
The machine requires a functioning USB port on the control panel.
High accuracy and linearity.
For fully automatic determination of component zero-points, measurement of lengths, bore centres, reference edges and axial alignment.
Convenient and simple concentricity adjustment.
Large working range in all directions (x, y, z = 7 mm).
Compact metal body.
Dust-tight and watertight = IP67.
Predetermined breaking point.
Simple menu navigation.
Quick commissioning without hardware changeover and service engineer use.
No need to interfere with the machine tool operating system!Minimisation of rejects.

Function:

IP67:

Protected against intermittent immersion in water and protected against penetration by dust (dust-tight), also completely protected against touching.

IP67:

Protected against intermittent immersion in water and protected against penetration by dust (dust-tight), also completely protected against touching.

Application:

Automatic transmission of the measured values into the machine control by GARANT XCONNECT No.
359455 1.
For fully automatic determination of component zero-points, measurement of lengths, bore centres, reference edges and axial alignment.
Manual operation without wireless transmission (without XCONNECT) is also possible.

Supplied with:

Supplied with battery CR2 and contact point No.
359505 size 4.

Optional extras:

XCONNECT data memory stick 359455 1.

Note:

Suitable contact point No.
359505 4.
The item is permanently installed on a machine and can only be used on another machine through another cycle request.

Thông tin kỹ thuật